2 Combo Lathe
FC-DF11/DP11
Allow one operator to operate two CNC lathe at the same time. Multiple effect will take place if more DP-11 are in production line. Saving production area.
Single spindle with two chunks, able to clamp two different diameters work piece.
Tooling two different detail at the same time.
Allow one operator to operate two CNC lathe at the same time. Mulitiple effect will take place if more DP-11 are in production line. Saving production area.
| Model | FC-DF11/DP11 | ||
| SPINDLE | 42S | ||
|---|---|---|---|
| No. of spindle | unit | 1 | |
| Max.speed | rpm | 4000 | |
| Feedrate | X/Z axis rapid traverse | M/min | 16 |
| Stroke | X1 axis stroke | mm | 160 |
| X2 axis stroke | mm | 160 | |
| Z1 axis stroke | mm | 220 | |
| Z2 axis stroke | mm | 220 | |
| Y1 axis stroke | mm | - | |
| Y2 axis stroke | mm | - | |
| Turret | No. of turret | unit | 2 |
| Turret type | servo | V8-st | |
| O.D. tool shank | mm | 20 x 20 | |
| I.D. tool shank(Max.) | Ø mm | 25 | |
| Motors | Spindle motor | KW | 7.5 |
| Servo motor, X axis | KW | 1.5 | |
| Servo motor, Z axis | KW | 1.5 | |
| Hydraulic pump | HP | 2 | |
| Lubrication pump | W | 12 | |
| Coolant pump | KW | 0.75 | |
| X/Y/Z/C-axis Robot Motor(Opt) | KW | 0.4/0.4/0.75/0.75 | |
| Machine size | Length | mm | 3920 |
| Width | mm | 2150 | |
| Height | mm | 1900 | |
| Net weight | kgs | 4500 | |
| Gross weight | kgs | 5000 | |
Specifications are subject to change without further notice.
Standard
- Full guard
- Coolant system
- Air conditioner
- Operator panel
- Tools for set up
- Pneumatic/Hyd. System
- Tower light
- Work light
- Chip conveyor
Optional
- Auto load/unload system
- Chuck
- Extension chuck sleeve
- Collet
- Oil mist collector
- FANUC / PC BASED
- Hydraulic tailstock
- Servo tailstock
